پديدآورندگان :
Esmaeilzade Romina romina.esm@aut.ac.ir Department of Polymer Engineering and Color Technology, Amirkabir University of Technology / JAM petrochemical company, department of research and development , Rashedi Reza JAM petrochemical company, department of research and development , Hosseini Shahin JAM petrochemical company, department of research and development , Sepahi H JAM petrochemical company, department of research and development , Afzali Kamal JAM petrochemical company, department of research and development
چكيده فارسي :
A software program for experimental design and response surface methodology (RSM) was used to set up and evaluate the effect of processing parameters and LLDPE concentration on the haze of LDPE/LLDPE blown films. DDR and weight percentage of LLDPE were the most protuberant factors. High haze was observed at low LLDPE loadings and high DDR, while low haze was observed at low LLDPE loading and high DDR.
