پديدآورندگان :
Dariushi Soheil Composites Department, Iran Polymer and Petrochemical Institute, Pazhoohesh Blvd., 149771311, Tehran, Iran , Esfandeh M Composites Department, Iran Polymer and Petrochemical Institute, Pazhoohesh Blvd., 149771311, Tehran, Iran , Mosleh N Composites Department, Iran Polymer and Petrochemical Institute, Pazhoohesh Blvd., 149771311, Tehran, Iran
كليدواژه :
Polymer Composites , Impregnation , Tape Width , Printability , 3D Printing
چكيده فارسي :
In this study, carbon fiber-reinforced acrylonitrile butadiene styrene (ABS/carbon) composites were fabricated using pre-impregnated tape. The printability of pre-impregnated tapes with different widths was investigated, and the results showed that the tape width significantly affects the appearance and printability of the composites. Then, the interlaminar shear strength (ILSS) of the printed composites with optimum printing quality were evaluated. The results showed that the use of prepreg tapes increased the composites ILSS compared to the neat ABS sample.
