شماره ركورد كنفرانس :
5536
عنوان مقاله :
The Influence of Electrospinning Parameters on Morphological Properties of Polyamide-6,6 Nanofibers
پديدآورندگان :
Asadi nasab Amal Polymer Engineering Department, Qom University of Technology, P.O. Box 1519-37195, Qom, Iran , Zamani Fatemeh Hazrat-e Masoumeh University, P. O. Box: 37115-145, Qom, Iran , Najafi Mohsen Polymer Engineering Department, Qom University of Technology, P.O. Box 1519-37195, Qom, Iran
كليدواژه :
Polyamide , 6 , 6 , Nanofibers , Electrospinning , Taguchi Design.
عنوان كنفرانس :
پانزدهمين همايش بين المللي علوم و فناوري پليمر
چكيده فارسي :
In this research, using polyamide-6 (PA-6,6), three important parameters of the electrospinning process, including polymer solution concentration, voltage and electrospinning distance, were precisely studied and influences of these parameters on the morphology of nanofibrous mats were investigated. Taguchi method was utilized to design the experiments at the settings of these three parameters. The surface morphology of the samples was examined using SEM and microstructure measurement. The results showed that the concentration has the greatest effect on the diameter of the fibers as well as the smallest and the most uniform diameter of PA-6,6 nanofibers were obtained in the first and the last level of the Taguchi design, respectively.
