Author/Authors
DORUK, Şemsettin Dumlupınar Üniversitesi (D.P.Ü.) - Simav Teknik Eğitim Fak - Mobilya ve Dekorasyon Eğit, Turkey , PERÇİN, Osman Gazi Üniversitesi - Teknik Eğitim Fak - Mobilya ve Dekorasyon Eğit, Turkey
Title Of Article
Effects of Heat Treatment on Bending and Compression Strengthes of Some Wood
شماره ركورد
15695
Abstract
In this study, After Scots pine (Pinus sylvestris L.), oriantal beech (Fagus orientalis L.) and black poplar (Populusnigra L.) were heat-treated for 2 hours, 6 hours and 10 hours at130ºC, 165ºC and 200 ºC, bending and compression tests were carried out according to the TS 2474 and the TS 2595. Experimental results, as depending on the heat treatment time and temperature, increase the wood the color of the dark. While highest pressure resistance the value controls beech samples 70.94 (N/mm2) was obtained, the lowest value and 200 ° C, 10 h heat treated poplar wood in the 37,09 (N/mm2) was obtained. In addition to, highest bending strenght controls beech samples105,7 (N/mm2) was obtain, lowest value and 200 ° C, 10 h heat treated poplar wood in the 49,17 (N/mm2) was obtained. Based on this results, increas of heat treatment time and temperature, values of on the bending and pressure strenght can be said.
From Page
143
NaturalLanguageKeyword
heat treatment , wood material , bending strenght , pressure resistance
JournalTitle
Journal Of Polytechnic
To Page
150
JournalTitle
Journal Of Polytechnic
Link To Document