UTANIR, İbrahim TOFAŞ, Türk Otomotiv Fabrikası A.Ş., Turkey , ÖZTÜRK, Özgür TOFAŞ, Türk Otomotiv Fabrikası A.Ş., Turkey , DORUK, Emre TOFAŞ, Türk Otomotiv Fabrikası A.Ş., Turkey

Parametric Design of Vehicle Body Architectural Sections

15896

In this study, a new system is developed. Aim of this project is to create a parametric modeling methodology to facilitate creating vehicle architectural 2D body sections by using a software which works in UniGraphics. These sections, which created parametrically by using this methodology, can also be modified easily with various of design changes, including vehicle dimensional changes, vehicle and component changes and also style changes etc. Development time was reduced, process was standardized consequently the design quality was improved and the development cost was reduced.

269

Parametric design , knowledge based engineering , sytle feasibility

Journal Of Polytechnic

274