Author/Authors
DUSUN, Mustafa Düzce Üniversitesi, Konuralp Yerleşkesi - Teknik Eğitim Fakültesi - Elektrik Eğitimi Böl, Turkey , ÇİMEN, Hasan Afyon Kocatepe Üniversitesi - Teknik Eğitim Fakültesi - Elektrik Eğitimi Böl, Turkey
Title Of Article
THE EFFECT OF MARBLE CUTTING PROCESS WITH AND WITHOUT INVERTER ON ELECTRIC ENERGY
شماره ركورد
16380
Abstract
In this study, an inverter application was made in order to reduce the consumption of electrical energy in the marble cutting machines. The control parameter of the inverter was kept constant and amount of energy consumption were compared by changing of frequency parameters. Open loop V/f control technique was chosen as control method on the inverter. In active, reactive and specific energy occurred variations with changing of speed ratio. Also the experiments were done without inverter and the differences between two cases were investigated. In the light of these results the most efficient cutting range for consuming less energy in marble cutting machines was determined.
From Page
381
NaturalLanguageKeyword
Marble cutting machine , inverter , parameter , open loop V , f control.
JournalTitle
Journal Of The Faculty Of Engineering and Architecture Of Gazi University
To Page
388
JournalTitle
Journal Of The Faculty Of Engineering and Architecture Of Gazi University
Link To Document