Author/Authors :
YILDIRIM, Serdar Dokuz Eylül Üniversitesi - Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği, Mühendislik Fakültesi, Elektronik Malzemeler Üretimi ve Uygulama Merkezi (EMUM) - Metalurji ve Malzeme Mühendisliği Bölümü, Turkey , YILDIRIM, Serdar Nanoteknolojileri Araştırma ve Geliştirme Dezenfektan San. (TEKNOBIM), Turkey , YURDDAŞKAL, Metin Dokuz Eylül Üniversitesi - Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği, Mühendislik Fakültesi, Elektronik Malzemeler Üretimi ve Uygulama Merkezi (EMUM) - Metalurji ve Malzeme Mühendisliği Bölümü, Turkey , YURDDAŞKAL, Metin Afyon Kocatepe Üniversitesi - Teknoloji Fakültesi - Metalurji ve Malzeme Mühendisliği Bölümü, Turkey , ÖZTÜRK, Berkan Dokuz Eylül Üniversitesi - Elektronik Malzemeler Üretimi ve Uygulama Merkezi (EMUM), Fen Bilimleri Enstitüsü, Maden Mühendisliği, Turkey , BATAR, Turan Dokuz Eylül Üniversitesi - Elektronik Malzemeler Üretimi ve Uygulama Merkezi (EMUM), Fen Bilimleri Enstitüsü, Maden Mühendisliği, Fen Bilimleri Enstitüsü, Nanobilim ve Nanomühendislik, Turkey , BATAR, Turan Gediz Üniversitesi - Mühendislik Fakültesi, Makina Mühendisliği, Turkey , ÇELİK, Erdal Dokuz Eylül Üniversitesi - Mühendislik Fakültesi, Elektronik Malzemeler Üretimi ve Uygulama Merkezi (EMUM), Fen Bilimleri Enstitüsü, Nanobilim ve Nanomühendislik - Metalurji ve Malzeme Mühendisliği Bölümü, Turkey
Title Of Article :
Synthesis and Properties of Nano Scale MgO powders via Flame Spray Pyrolysis for Graphen Production as a Catalyzor Material
شماره ركورد :
27607
Abstract :
Oxide nanomaterials have a wide range of applications including as catalysts and starting materials for preparing advanced structural ceramics. MgO is highly insulating crystalline solid with NaCl crystal structure with excellent properties such as chemical inertness, electrical insulation, optical transparency, high temperature stability, high thermal conductivity, and secondary electron emission. In this study, nano scale MgO powders were synthesized via flame spray pyrolysis (FSP) technique for graphen production as catalyzor materials. The produced powders were post-annealed to obtain crystalline structure at 500°C for 120 minutes in air. The phase structure was analyzed by x-ray diffractometer (XRD). The morphology and accurate size of the primary particles were further investigated by scanning electron microscope (SEM). Particle size was determined using particle size analyzer (PSA). As a result of the analysis, it was determined that particles size is 60 nm and the phase structure is MgO (periclase).
From Page :
461
NaturalLanguageKeyword :
Nano scale MgO powders , Flame spray pyrolysis
JournalTitle :
Afyon Kocatepe University Journal Of Science an‎d Engineering
To Page :
465
Link To Document :
بازگشت