Author/Authors
topçu, ilker bekir eskişehir osmangazi üniversitesi - mühendislik fakültesi - inşaat mühendisliği bölümü, Turkey , uygunoğlu, tayfun afyon kocatepe üniversitesi - mühendislik fakültesi - inşaat mühendisliği bölümü, Afyonkarahisar, Turkey , hocaoğlu, ismail afyon kocatepe üniversitesi - mühendislik fakültesi - inşaat mühendisliği bölümü, Turkey
Title Of Article
Investigation of Electrical Resistivity of Cement Paste Blended with Blast Furnace Slag
شماره ركورد
29419
Abstract
In this study, the effects of blast furnace slag content and water/cement ratio at cement pastes on the electrical resistivity were investigated. Admixtures having different water/cement ratios and admixtures having binder at different dosage levels were prepared. The blast furnace slag was used in the admixtures by replacing the cement in ratio of 0%, 10%, 20% and 30% by weight. Electrical current was applied to the fresh cement pastes in the molds. The measurements were done at room temperature. The differences between electrical resistivity and hydration time with and without electric current application on the specimens were investigated. As a result, adding blast furnace slag at a high proportion and application of electrical current to the cement pastes shorten the setting time.
From Page
257
NaturalLanguageKeyword
Concrete structures , cement paste , electrical resistivity , blast furnace slag
JournalTitle
Journal Of Polytechnic
To Page
264
JournalTitle
Journal Of Polytechnic
Link To Document