Author/Authors
KAYIR, Yunus Gazi Üniversitesi - Teknik Eğitim Fakültesi - Makine Eğitimi Bölümü, Turkey
Title Of Article
Effect of Drilled Hole Diameter on Cutting Forces and Torques for Thread Tapping on AISI 1050 Stell with Taps
شماره ركورد
34663
Abstract
In this study; threads were tapped in drilled holes on AISI 1050 material with HSS machine taps coated and uncoated TIN. Holes were drilled by using HSS twist drills of which diameters are different from each other. Four different diameters were used for HSS twist drills. Threads were tapped in these holes by using taps of which forms are different from each other. Cutting forces and torques were measured in during thread tapping by using a dynamometer. An effect of hole diameter on cutting forces and torques was investigated. All of experimental was made on CNC Milling machines with cutting oil. The experimental results have shown that the hole diameters affect torques and cutting forces occurred during the tapping process.
From Page
99
NaturalLanguageKeyword
Tap , Thread tapping , Thread cutting , Cutting force , AISI 1050.
JournalTitle
Uludağ University Journal of The Faculty of Engineering
To Page
111
JournalTitle
Uludağ University Journal of The Faculty of Engineering
Link To Document