Author/Authors
Çiçek, Adem Düzce Üniversitesi - Teknoloji Fakültesi - İmalat Mühendisliği Bölümü, Turkey , Ekici, Ergün Düzce Üniversitesi - Teknoloji Fakültesi - İmalat Mühendisliği Bölümü, Turkey , Uygur, İlyas Düzce Üniversitesi - Teknoloji Fakültesi - İmalat Mühendisliği Bölümü, Turkey , Akıncıoğlu, Sıtkı Düzce Üniversitesi - Teknoloji Fakültesi - İmalat Mühendisliği Bölümü, Turkey , Kıvak, Turgay Düzce Üniversitesi - Teknoloji Fakültesi - İmalat Mühendisliği Bölümü, Turkey
Title Of Article
INVESTIGATION OF THE EFFECTS OF DEEP CRYOGENIC TREATMENT ON TOOL LIFE IN DRILLING OF AISI D2 COLD WORK TOOL STEEL
شماره ركورد
35763
Abstract
In this study, the effects of deep cryogenic treatment (-196 ºC) applied to M35 HSS twist drills on tool life, tool wear, micro-structure and micro-hardness were investigated in drilling of AISI D2 cold work tool steel. The drilling experiments were performed at three different cutting speeds (20, 25, and 30 m/min), a constant feed rate (0.1 mm/rev) and hole depth (7 mm). It was observed from micro-structure photographs and micro hardness values that deep cryogenic treatment significantly was effective on transformation of retained austenite to martensite and more homogenous distribution of white carbides. The cryogenically treated drills showed better performance in terms of the tool life and wear, when compared with untreated drills. Tool life experiments showed that lives of treated drills improved as much as 33-62%. BUE formation, outer corner wear and flank wear generally were effective on tools. In general, it was found that deep cryogenic treatment had positive effects on the tool wear and tool life.
From Page
1
NaturalLanguageKeyword
Deep Cryogenic Treatment , Micro , Structure , Micro , Hardness , Tool Life , Tool Wear
JournalTitle
Sdu International Technologic Science
To Page
9
JournalTitle
Sdu International Technologic Science
Link To Document