Author/Authors
turhan, sevil süleyman demirel üniversitesi - teknoloji fakültesi - imalat müh. bölümü, Turkey , özsoy, abdullah süleyman demirel üniversitesi - teknoloji fakültesi - imalat müh. bölümü, Turkey
Title Of Article
EFFECT OFPROCESS PARAMETERES TO Ti6Al4V ALLOY PROPERTIES PRODUCED BY DMLS METHOD
شماره ركورد
35872
Abstract
In this study, test specimens were produced by using DMLS device is one of the additive manufacturing methods. Test specimens were produced by using Ti6Al4V powders with some different process parameters such as laser power, laser velosity, hatch distance and these parameters related to energy density and applied to X hatching strategy. It was investigated that microhardnes, manufacturing density and microstructure by applying to different laser energy density. While microhardness was 1.36 J/mm² energy 345 HV, microhardness was increased 414 HVapplied to energy density 3 J/mm². While production (sintering) density was 1.36 J/mm² energy 4.40 g/cm³, produced (sintering) was increased 4.44 g/cm³ applied to energy density 3 J/mm2.It is observationed that microstructure was occured equiaxed grains in the cross section of the sample.
From Page
15
NaturalLanguageKeyword
Metal sintering , process parameters , microstructure , microhardness , density
JournalTitle
Sdu International Technologic Science
To Page
27
JournalTitle
Sdu International Technologic Science
Link To Document