ABUAZIAH, I. Agronomic and Veterinary Medicine Hassan II Institute - Rural engineering department, Morocco , OULHAJ, A. Agronomic and Veterinary Medicine Hassan II Institute - Rural engineering department, Morocco , SEBARI, K. Agronomic and Veterinary Medicine Hassan II Institute - Rural engineering department, Morocco , ABBASSI SABER, A. Agronomic and Veterinary Medicine Hassan II Institute - Rural engineering department, Morocco , Ouazar, D. Ecole Mohammadia d’Ingénieurs - Civil engineering, Morocco , SHAKAMEH, N. Al-Quds University - Electrical engineering, Palestine

Modeling and controlling flow transient in pipeline systems: Applied for reservoir and pump systems combined with simple surge tank

39494

When transient conditions (water hammer) exist, the life expectancy of the system can be adversely impacted, resulting in pump and valve failures and catastrophic pipe rupture. Hence, transient control has become an essential requirement for ensuring safe operation of water pipeline systems. To protect the pipeline systems from transient effects, an accurate analysis and suitable protection devices should be used. This paper presents the problem of modeling and simulation of transient phenomena in hydraulic systems based on the characteristics method. Also, it provides the influence of using the protection devices to control the adverse effects due to excessive and low pressure occuring in the transient. We applied this model for two main pipeline systems: Valve and pump combined with a simple surge tank connected to reservoir. The results obtained by using this model indicate that the model is an efficient tool for water hammer analysis. Moreover, using a simple surge tank reduces the unfavorable effects of transients by reducing pressure fluctuations.

12

Flow Transient , Water hammer , Pipeline System , Surge Tank , Simulation Model , Protection Devices , Characteristics Method

Revue Marocaine des Sciences Agronomiques et Vétérinaires

18