Author/Authors :
TURAN, Kadir Dicle Üniversitesi - Mühendislik - Mimarlık Fakültesi - Makine Mühendisliği Bölümü, Turkey , KAMAN, Mete Onur Fırat Üniversitesi - Mühendislik Fakültesi - Makine Mühendisliği Bölümü, Turkey , GÜR, Mustafa Fırat Üniversitesi - Mühendislik Fakültesi - Makine Mühendisliği Bölümü, Turkey
Title Of Article :
Effect of Fiber Orientation Angle on the Failure Mode of Pin Jointed Laminated Composite Plates
Abstract :
In this study, the major aim is to investigate change effects of fiber orientation angles on the failure loads and failure modes for the pin jointed laminated composite plates. In the analysis, laminated composite plates with epoxy matrix resin reinforced unidirectional carbon fibers are used. The ply arrangements are chosen [θ°]_4 and θ; fiber reinforced angle changes from 0° to 90° with 15° increments. The failure load and failure mode are analyzed experimentally and numerically. In the numerical analysis Ansys program is used. In the program, material properties are degraded using APDL code which is written for progressive failure analysis and contains Hashin failure criteria for laminated composite plates. In the experimental study, the maximum failure load for [15°]_4 laminae cofiguration, 749.917 N and minimum failure load for [60°]_4 467.483 N laminae configuration are obtained. A good agreement between experimental and numerical solution is obtained.
NaturalLanguageKeyword :
Laminated composite materials , Progressive failure analysis , Pin joints , Finite element method.
JournalTitle :
Pamukkale University Journal Of Engineering Sciences
