Author/Authors
ALTIN, Zehra Gülten Yıldız Teknik Üniversitesi - Kimya-Metalurji Fakültesi - Kimya Mühendisliği Bölümü, Turkey , KEYF, Seyfullah Yıldız Teknik Üniversitesi - Kimya-Metalurji Fakültesi - Kimya Mühendisliği Bölümü, Turkey , ÇORBACIOĞLU, Burcu Didem Yıldız Teknik Üniversitesi - Kimya-Metalurji Fakültesi - Kimya Mühendisliği Bölümü, Turkey , BEYRİBEY, Berceste Yıldız Teknik Üniversitesi - Kimya-Metalurji Fakültesi - Kimya Mühendisliği Bölümü, Turkey
Title Of Article
SOLID-LIQUID EXTRACTION OF JOJOBA OIL OBTAINED BY THE PROCESS AND THE PROCESS VARIABLES OIL EFFECTS ON YIELD
شماره ركورد
41601
Abstract
In this study, hexane was used as solvent to extract Jojoba oil in a batch leaching process. The effects of temperature, mixing speed, particle size and solvent-to-seed ratio on Jojoba oil extraction were investigated. The best yield of oil was obtained when the parameters investigated were at the boiling point temperature of the solvent, a particle size of 0,48 mm, a mixing speed of 1000 rpm, and a solvent-to-seed ratio of 15 ml/g. The maximum amount exracted was 55 wt-% under the above-mentioned operating conditions. The amount extracted at a higher particle size (1,5 mm) was around 44 wt-%. An empirical model was obtained based on the experimental data, in order to predict the extraction yield under the operating conditions. The derived model is in good agreement with the experimental data, with a maximum deviation of 8%.
From Page
447
NaturalLanguageKeyword
EKSTRAKSİYON İŞLEMİ İLE JOJOBA YAĞININ ELDESİ VE İŞLEM DEĞİŞKENLERİNİN YAĞ VERİMİ ÜZERİNDEKİ ETKİLERİ
JournalTitle
Sigma Journal Of Engineering and Natural Sciences
To Page
455
JournalTitle
Sigma Journal Of Engineering and Natural Sciences
Link To Document