Author/Authors
ermergen, tolgahan isparta uygulamalı bilimler üniversitesi - teknoloji fakültesi - makine mühendisliği bölümü, Isparta, Türkiye , taylan, fatih isparta uygulamalı bilimler üniversitesi - teknoloji fakültesi - makine mühendisliği bölümü, Isparta, Türkiye
Title Of Article
Surface finish processes for additively manufactured metal parts
شماره ركورد
45217
Abstract
Additive manufacturing offers the possibility of manufacturing of parts with complex geometries which are not possible to be manufactured by conventional machining processes. Since it is likely to manufacture complex parts as a single element, which have similar mechanical properties compared to their counterparts manufactured by machining or plastic deformation methods, additive manufacturing methods grown very popular recently. Although additive manufacturing methods have lots of advantages, there are also some disadvantages concerning surface quality. Parts with low fatigue strength due to their bad surface quality can not offer high performance under dynamic load conditions. For this reason, additively manufactured parts should be subjected to surface finish processes in order to eliminate surface roughness. In this work, surface finish processes that are applied to additively manufactured metal parts, for the purpose of surface roughness elimination thus fatigue strength increase, have been explained.
From Page
45
NaturalLanguageKeyword
Additive manufacturing , Surface finishing , Surface roughness , Fatigue strength
JournalTitle
Sdu International Technologic Science
To Page
55
JournalTitle
Sdu International Technologic Science
Link To Document