Title :
High-speed MT connector assembly method
Author :
Shibata, Koji ; Hogari, Kazuo ; Sankawa, Izumi
Author_Institution :
NTT Tech. Assistance & Support Center, Tokyo, Japan
fDate :
7/1/2004 12:00:00 AM
Abstract :
This letter describes a high-speed mechanically transferable (MT) connector assembly method. The method uses adhesive with a short hardening time and high reliability, and does not require a polishing process. First, we investigated an alpha-cyanoacrylate adhesive that hardens quickly and whose adhesive strength does not decrease under high humidity and high temperature conditions, thus ensuring its high reliability for outside use. We assembled an MT connector using our proposed high-speed assembly method. We confirmed that the assembly time could be reduced to less than 70% of the time required with the conventional assembly method. The MT connectors assembled using this method have a low insertion loss and stable environmental characteristics.
Keywords :
adhesives; optical communication equipment; optical fabrication; optical fibre communication; optical fibre couplers; reliability; alpha-cyanoacrylate adhesive; high-speed connector assembly method; insertion loss; mechanically transferable connector assembly method; optical fibers; reliability; Adhesive strength; Assembly; Connectors; Humidity; Insertion loss; Optical fiber networks; Optical fibers; Optical losses; Plastics; Temperature;
Journal_Title :
Photonics Technology Letters, IEEE
DOI :
10.1109/LPT.2004.826736