A Novel Wideband Bandpass Filter Using A Cross-Shaped Multiple-Mode Resonator

A novel wideband bandpass filter (BPF) using a cross-shaped microstrip multiple-mode resonator (MMR) is presented in the letter. The MMR is composed of a section of open-ended microstrip-line and a pair of short-ended stubs. Its three resonant modes are used to construct the passband of the proposed BPF. And two coplanar waveguides are used as the input/output transmission-lines to improve the coupling between the MMR and input/output transmission-lines. The filter has been investigated numerically and experimentally. Both simulated and measured results show that the filter has a good performance, including controllable bandwidth from 66% to 114%, low insertion loss (lower than 0.78 dB), and a small group delay variation.