DocumentCode :
1019288
Title :
A CDMA2000 zero-IF receiver with low-leakage integrated front-end
Author :
Waite, H. ; Ta, P. ; Chen, J. ; Li, H. ; Gao, M. ; Chang, C.S. ; Chang, Y.S. ; Redman-White, W. ; Charlon, O. ; Fan, Y. ; Perkins, R. ; Brunel, D. ; Soudee, E. ; Lecacheur, N. ; Clamagirand, S.
Author_Institution :
Philips Semicond., San Jose, CA, USA
Volume :
39
Issue :
7
fYear :
2004
fDate :
7/1/2004 12:00:00 AM
Firstpage :
1175
Lastpage :
1179
Abstract :
This paper describes a highly integrated CDMA 2000 US-CEL band (880-MHz) receiver. The single-chip zero-IF design incorporates all receiver signal-path functions including the low-noise amplifier (LNA) on a single die. The complete receiver design exceeds the stringent linearity and local oscillator (LO) leakage requirements for this standard arising from the coexistence with narrow-band FM signals. The integrated LNA achieves 1.0-dB noise figure with +9-dBm IIP3 at high gain, and by maintaining LO leakage to the antenna port well below -80 dBm at all gain settings, no external LNA is required. The receiver is fabricated in a 0.25-μm 40-GHz ft BICMOS technology, and occupies 3 mm2.
Keywords :
BiCMOS integrated circuits; amplifiers; code division multiple access; integrated circuit manufacture; radio receivers; 0.25 micron; 1.0 dB; 40 GHz; 880 MHz; BICMOS technology; CDMA2000; RF front-end; US-CEL band receiver; antenna port; gain settings; integrated channel filter; local oscillator leakage requirements; low-leakage integrated front-end; low-noise amplifier; narrow-band FM signals; receiver signal-path functions; zero-IF receiver; Costs; Filters; Frequency; Linearity; Local oscillators; Low-noise amplifiers; Multiaccess communication; Narrowband; Receivers; Signal design; CDMA; I/Q; RF front-end; integrated channel filter; receiver; zero IF;
fLanguage :
English
Journal_Title :
Solid-State Circuits, IEEE Journal of
Publisher :
ieee
ISSN :
0018-9200
Type :
jour
DOI :
10.1109/JSSC.2004.829965
Filename :
1308593
Link To Document :
بازگشت