DocumentCode :
1024653
Title :
A high field two mode superferric magnet
Author :
Xie, W. ; Phillips, G.C. ; Wenzel, W.A. ; Hinterberger, H. ; Briske, J.
Author_Institution :
Rice University, Houston, Texas
Volume :
23
Issue :
2
fYear :
1987
fDate :
3/1/1987 12:00:00 AM
Firstpage :
488
Lastpage :
489
Abstract :
We have designed and are building a high field Two-Mode (TM) superferric dipole magnet for particle accelerators. At low field it behaves as a ferric magnet while at high field as a 
magnet. While the magnet can go up to any field as can a magnet (limited by superconductor performance), the use of iron and rectangular rather than radial geometry retains the advantages of low field ferric magnets: substantial superconductor saving, more reliable operation, and easy fabrication.
magnet. While the magnet can go up to any field as can a magnet (limited by superconductor performance), the use of iron and rectangular rather than radial geometry retains the advantages of low field ferric magnets: substantial superconductor saving, more reliable operation, and easy fabrication.Keywords :
Accelerator magnets, superconducting; Buildings; Fabrication; Geometry; Iron; Laboratories; Permeability; Saturation magnetization; Superconducting cables; Superconducting coils; Superconducting magnets;
fLanguage :
English
Journal_Title :
Magnetics, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9464
Type :
jour
DOI :
10.1109/TMAG.1987.1065053
Filename :
1065053
Link To Document :
