Title :
Modern Double-Reduction Traction Motor
Author_Institution :
Design engineer with the transportation motor engineering division, General Electric Company, Erie, Pa.
fDate :
7/1/1946 12:00:00 AM
Abstract :
Incorporated in the modern double-reduction motor and gear unit are many new design features which have made it an outstanding motor for the past five years. Oil lubrication is provided for all gearing and bearings in the oil-tight double-reduction gear unit. Special design constants, which have been developed as a result of many years of experience with high-speed motors, are used. Self-ventilation is successful on a high-speed motor and simplifies locomotive design. Specially insulated field coils provide for good heat transfcr from the coils to steel and air. A small motor with a high-speed armature results in low copper loss and high efficiency at high tractive effort. A steep speed curve with a large amount of field shunting makes it possible to use all motors connected permanently in parallel. The motor is small, compact, aud lightweight, which has made possible its use oil a wide range of locomotives. Here is a small motor doing a big job.
Keywords :
Coils; Copper; Gears; Lubrication; Petroleum; Rails; Steel; Torque; Traction motors; Wheels;
Journal_Title :
American Institute of Electrical Engineers, Transactions of the
DOI :
10.1109/T-AIEE.1946.5059372