Title : 
Sulfur modified chromium dioxide
         
        
            Author : 
Hirota ; Kawamata, Takaya ; Mihara, Teruyoshi ; Terada, Yuki
         
        
            Author_Institution : 
Matsushita Electric Industrial Company, Ltd., Osaka, Japan.
         
        
        
        
        
            fDate : 
9/1/1972 12:00:00 AM
         
        
        
        
            Abstract : 
Chromium dioxide modified with sulfur has been studied with the intention of obtaining a magnetic powder which is suitable for the tape of thermomagnetic duplication. Sulfur ions dissolve into CrO2up to about 0.17 wt.% and decrease the Curie temperature and saturation magnetization. With added sulfur of about 1 wt.%, the Tc of chromium dioxide is lowered by 20°C and the σsbecomes about 70 EMU/g. The lattice parameter a0increases with increasing sulfur, while c0shows no change. The CrO2with only a sulfur modifier does not have fine acicular shape. Therefore, the combined addition of S and Te was tried. The S-Te-modified CrO2has Tcof 100°C, Hcof 400 Oe and σsof 81 EMU/g. The particle shape of this oxide is about 0.5 μm in average length and 10/1 in length to width ratio. This powder has high potential for use in the magnetic tape of thermal duplication.
         
        
            Keywords : 
Chromium oxides; Magnetic tape materials; Magnetic tape recording; Thermomagnetic recording materials; Chromium; Cobalt; Coercive force; Lattices; Magnetic recording; Powders; Printing; Saturation magnetization; Shape; Temperature;
         
        
        
            Journal_Title : 
Magnetics, IEEE Transactions on
         
        
        
        
        
            DOI : 
10.1109/TMAG.1972.1067435