• DocumentCode
    1052293
  • Title

    All-solid-state camera for the 525-line television format

  • Author

    Sequin, Carlo H. ; Zimany, Edward J., Jr. ; Tompsett, Michael F. ; Fuls, E.N.

  • Author_Institution
    Bell Laboratories, Murray Hill, NJ
  • Volume
    23
  • Issue
    2
  • fYear
    1976
  • fDate
    2/1/1976 12:00:00 AM
  • Firstpage
    183
  • Lastpage
    189
  • Abstract
    A charge-coupled image sensor of the vertical frame transfer type has been fabricated with three-phase three-level polysilicon electrodes. The device has 496 vertically interlaced rows of elements and 475 resolution elements/line. The imaging area, measuring 12.8 × 9.6 mm2, corresponds to that of a 1-in vidicon. Defect-free devices have not yet been fabricated, but with an appropriate effort such devices seem feasible. The device is operated in a self-contained camera, measuring 6 × 6 × 15 cm, containing the countdown circuitry, and implemented with commercially available TTL. The clock line drivers are built with discrete transistors. The camera produces a suitably filtered black-and-white video signal in the standard 525-line television format, which includes the necessary blanking periods and synchronization signals. Large-scale integration (LSI) of these circuits could readily lead to a camera which could be smaller by more than a factor of two.
  • Keywords
    Area measurement; Blanking; Cameras; Charge-coupled image sensors; Clocks; Driver circuits; Electrodes; Large scale integration; Synchronization; TV;
  • fLanguage
    English
  • Journal_Title
    Electron Devices, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0018-9383
  • Type

    jour

  • DOI
    10.1109/T-ED.1976.18372
  • Filename
    1478386