Study of An Improved Dual-Switch Converter With Passive Lossless Clamping

Affected by the equivalent series resistance (ESR) of the devices in the circuit, the voltage-conversion ratio of traditional boost converter is limited. Various topologies have been developed to provide a high step-up voltage gain. An inherent high voltage gain can be achieved in a dual-switch converter with the advantages of low voltage and current stress on the switches. However, this converter has a strict requirement of the parameters´ consistency. This paper discusses the steady-state operation principle of the converter in detail under the condition that the parameters are inconsistent and then illustrates the solutions to balance the voltage on the switches and suppress the resonance with passive lossless clamping. Finally, a prototype has been established in the laboratory, and simulation and experimental results have been given to verify the analysis and the effectiveness of clamping method.