DocumentCode
1055722
Title
Site-Specific Magnetic Assembly of Nanowires for Sensor Arrays Fabrication
Author
Rheem, Y. ; Hangarter, C.M. ; Eui-Hyeok Yang ; Deok-Yong Park ; Myung, N.V. ; Bongyoung Yoo
Author_Institution
Dept. of Chem. & Environ. Eng., Univ. of California-Riverside, Riverside, CA
Volume
7
Issue
3
fYear
2008
fDate
5/1/2008 12:00:00 AM
Firstpage
251
Lastpage
255
Abstract
The effect of variation in local magnetic field on magnetic assembly of 30 and 200 nm diameter Ni nanowires synthesized by template directed electrodeposition was investigated with different materials (Ni-Ni and Ni-Au) and shapes of electrodes. Ni-Au paired electrodes improved confinement of the assembled Ni nanowires across the electrode gap because of the narrower distribution of magnetic field around the gap between the two electrodes. Simulation results indicated a local magnetic field strength at the electrode tip increased by a factor of 2.5 with the use of a needle-shape electrode as compared to rectangular- shape electrode. The resistance of nanowire interconnects increased as the applied voltage was raised, and under the same applied voltage, the increase in resistance is further enhanced at lower temperatures because of higher current density.
Keywords
current density; electrodeposition; gold; integrated circuit interconnections; magnetic sensors; nanotechnology; nanowires; nickel; Ni-Au; current density; interconnects; magnetic field; nanowires; sensor arrays; site-specific magnetic assembly; size 200 nm; size 30 nm; template directed electrodeposition; Assembly; Electrodes; Fabrication; Magnetic confinement; Magnetic fields; Magnetic materials; Magnetic sensors; Nanowires; Sensor arrays; Shape; AAO; Anodized aluminum oxide (AAO); Ni; electrodeposition; local magnetic field; magnetic assembly; nanowires;
fLanguage
English
Journal_Title
Nanotechnology, IEEE Transactions on
Publisher
ieee
ISSN
1536-125X
Type
jour
DOI
10.1109/TNANO.2008.917852
Filename
4445653
Link To Document