Novel Specific Absorption Rate (SAR) Measurement Method Using a Flat Solid Phantom

A novel specific absorption rate (SAR) measurement method is presented that employs a flat solid phantom with multiple embedded E-field probes. A radio device under test traverses over them during the scanning process. The solid phantom provides stable dielectric properties and easy handling, while the multiple E-field probes contribute to shortening the time for measuring the SAR distribution. This method can also be used as an alternative to that employing flat phantoms filled with liquid. Based on the numerical approach, the measurement system configuration is designed to obtain the SAR distributions with an error of within 10% at 900 and 1950 MHz, focusing on the following points: dimensions of the flat solid phantom, size of the E-field probe, and distance between the E-field probes. The experimental setup for the frequency of 1950 MHz confirms that the proposed measurement method obtains the average SARs over 10 and 1 g with an error of within 10% compared to the computed values.