DocumentCode
1059008
Title
Automatic inductive voltage divider bridge for operation from 10 Hz to 100 kHz
Author
Avramov, Svetlana ; Oldham, Nile M. ; Jarrett, Dean G. ; Waltrip, Bryan C.
Author_Institution
Nat. Inst. of Stand. & Technol., Gaithersburg, MD, USA
Volume
42
Issue
2
fYear
1993
fDate
4/1/1993 12:00:00 AM
Firstpage
131
Lastpage
135
Abstract
A bridge to calibrate programmable and manual inductive voltage dividers is described. The bridge is based on a programmable 30-b binary inductive voltage divider with terminal linearity of ±0.1 ppm in phase and ±2 ppm quadrature at 400 Hz. Measurements of programmable test dividers can be automated using software developed to align the bridge components and perform an automatic balance
Keywords
bridge instruments; calibration; measurement standards; voltage dividers; voltage measurement; 10 Hz to 100 kHz; 400 Hz; inductive voltage divider bridge; manual divider; programmable divider; Automatic testing; Bridge circuits; Linearity; Manuals; Performance evaluation; Phase measurement; Software measurement; Software performance; Software testing; Voltage;
fLanguage
English
Journal_Title
Instrumentation and Measurement, IEEE Transactions on
Publisher
ieee
ISSN
0018-9456
Type
jour
DOI
10.1109/19.278535
Filename
278535
Link To Document