A novel proportional counter made of a capillary plate

Author

Tamura, T. ; Sakurai, H. ; Noma, M. ; Gunji, S. ; Ueno, H. ; Tsukahara, M. ; Hamano, M.

Author_Institution

Dept. of Phys., Yamagata Univ., Japan

Volume

43

Issue

3

fYear

1996

fDate

6/1/1996 12:00:00 AM

Firstpage

1533

Lastpage

1538

Abstract

A new type of proportional counter utilizing a capillary plate with the capability of fine position resolution and high gas gain has been developed. It consists of a bundle of fine glass capillaries with electrodes on both the inlet and the outlet. The capillaries are 100 μm in diameter and 800 μm in length, and gas multiplication was found to occur in each capillary with an applied voltage between the inlet and the outlet. The proportional counter was found to operate up to a gain of 10⁴ at gas pressures of 1, 0.75 and 0.5 atm. The energy resolution for 1 atm was 20.8% for 5.9 keV X-rays at a gas gain of 4000. The detection efficiency was comparable to a conventional single wire proportional counter. The dependences of energy resolution on the drift and applied voltage to the capillary plate are investigated and discussed, using calculated electric fields for the drift and capillary regions

Keywords

position sensitive particle detectors; proportional counters; 0.5 atm; 0.75 atm; 1 atm; 100 mum; 5.9 keV; 800 mum; capillary plate; detection efficiency; drift voltage; electric fields; energy resolution; fine glass capillaries bundle; fine position resolution; gas multiplication; high gas gain; proportional counter; Counting circuits; Electrodes; Energy resolution; Glass; Microchannel; Physics; Spatial resolution; Surface resistance; Voltage; X-rays;

fLanguage

English

Journal_Title

Nuclear Science, IEEE Transactions on

Publisher

ieee

ISSN

0018-9499

Type

jour

DOI

10.1109/23.507098

Filename

507098