Title :
Superconducting bending magnet for the RIKEN superconducting ring cyclotron
Author :
Okuno, H. ; Fujishima, S. ; Tominaka, T. ; Ohnishi, J. ; Ikegami, K. ; Goto, A. ; Yano, Y.
Author_Institution :
Cyclotron Center, RIKEN, Wako, Japan
fDate :
6/1/2004 12:00:00 AM
Abstract :
K2500 - superconducting ring cyclotron with 6-sectors is being constructed at RIKEN as one of the energy booster of the existing K540 ring cyclotron. The bending magnet for beam injection should be superconducting. Required fields are 3.8 T and radius of the coils is 1.2 m. After the fabrication, it was cooled down and excited. The magnet reached the designed field with one quench and training effect were clearly observed, which shows that it will works well to inject the beam into the superconducting cyclotron.
Keywords :
accelerator magnets; cyclotrons; ion accelerators; magnetic cooling; particle beam injection; quench hardening; superconducting coils; superconducting magnets; 1.2 m; 3.8 T; K2500; K540; RIKEN; beam injection; energy booster; quench effect; superconducting bending magnet; superconducting ring cyclotron; training effect; Cyclotrons; Fabrication; Geometry; Iron; Magnetic flux; Magnetic shielding; Structural beams; Superconducting coils; Superconducting magnets; Testing; Ring cyclotron; superconducting magnets;
Journal_Title :
Applied Superconductivity, IEEE Transactions on
DOI :
10.1109/TASC.2004.829072
