Development of a novel wind turbine simulator for wind energy conversion systems using an inverter-controlled induction motor

A wind turbine simulator for wind energy conversion systems has been developed with a view to design, evaluate, and test of actual wind turbine drive trains including generators, transmissions, power-electronic converters and controllers. The simulator consists of a 10-hp induction motor (IM) which drives a generator and is driven by a 10-kW variable speed drive inverter and real-time control software. In this simulator, a microcontroller, a PC interfaced to LAB Windows I/O board, and an IGBT inverter-controlled induction motor are used instead of a real wind turbine to supply shaft torque. A control program based on C language is developed that obtains wind profiles and, by using turbine characteristics and rotation speed of IM, calculates the theoretical shaft torque of a real wind turbine. Comparing with this torque value, the shaft torque of the IM is regulated accordingly by controlling stator current demand and frequency demand of the inverter. In this way, the inverter driven induction motor acts like a real wind turbine to the energy conversion system. The drive is controlled using the measured shaft torque directly, instead of estimating it as conventional drives do. The experimental results of the proposed simulator show that this scheme is viable and accurate. This paper reports the operating principles, theoretical analyses, and test results of this wind turbine simulator.