DocumentCode :
109575
Title :
A 2.2 mW, 40 dB Automatic Gain Controllable Low Noise Amplifier for FM Receiver
Author :
Chang-Jin Jeong ; Yang Sun ; Seok-Kyun Han ; Sang-Gug Lee
Author_Institution :
Dept. of Electr. Eng., Korea Adv. Inst. of Sci. & Technol. (KAIST), Daejeon, South Korea
Volume :
62
Issue :
2
fYear :
2015
fDate :
Feb. 2015
Firstpage :
600
Lastpage :
606
Abstract :
This paper presents an automatic gain controllable low noise amplifier (AGC-LNA) for FM receiver (FMRx). The proposed LNA adopts current reused dual gm-boosting technique for the power saving. And, a simple analog type automatic gain control (AGC) loop is proposed that provides high resolution gain control. Implemented in a 65 nm CMOS technology, measurements show power regulation range of 40 dB with ±1 dB error, less than -11 dB of S11, variable voltage gain range of -12 to 30 dB over the frequency range of 88 ~ 108 MHz, noise figure (NF) of less than 2.9 dB, P1dB of higher than -24.2 dBm, and IIP3 of higher than -12.7 dBm in the high gain (HG) mode, while dissipating only 1.8 mA from a 1.2 V supply, respectively.
Keywords :
CMOS analogue integrated circuits; automatic gain control; low noise amplifiers; radio receivers; AGC loop; CMOS technology; FM receiver; FMRx; HG mode; LNA; analog type automatic gain control loop; current 1.8 mA; current reused dual gm-boosting technique; frequency 88 MHz to 108 MHz; gain -12 dB to 30 dB; high gain mode; high resolution gain control; low noise amplifier; power 2.2 mW; power saving; voltage 1.2 V; Frequency modulation; Gain; Gain control; Noise; Noise measurement; Transistors; Voltage measurement; AGC; FM; FM radio; FM receiver; LNA; RSSI; VGLNA; automatic gain control; frequency modulation; low noise amplifier; received signal strength indicator; variable gain low noise amplifier;
fLanguage :
English
Journal_Title :
Circuits and Systems I: Regular Papers, IEEE Transactions on
Publisher :
ieee
ISSN :
1549-8328
Type :
jour
DOI :
10.1109/TCSI.2014.2362975
Filename :
6998048
Link To Document :
بازگشت