LED Backlight Driving System for Large-Scale LCD Panels

This paper presents an LED backlight driving system for large-scale liquid crystal display panels. High efficiency, high power factor, circuit simplicity, and low cost can be achieved by using a single-stage charge-pump asymmetrical half-bridge converter. To regulate the LED current and brightness for the LED backlight system, some current sharing methods are presented and compared. The requirements for the current sharing and luminance balance among paralleled LED arrays can be satisfied while current ripple is eliminated significantly. Because of the addition of bypass diodes, an alternative current path can be offered when a single LED fails. The LED array will not be extinguished. Reliability of the LED backlight system can thus be improved effectively. A laboratory prototype has been built and tested. The simulation and experimental results are shown to verify the feasibility of the proposed method.