Title :
The design of the drum separator with superconducting magnets
Author :
Sidorenko, V.D. ; Gerasimenko, I.A. ; Kretinin, E.A. ; Zhelamsky, M.V. ; Bondarchuk, E.N. ; Rodin, I.Yu. ; Muratov, V.P.
Author_Institution :
Lab. for Supercond. Technique & Technol., Mekhanobrchermet Inst., Krivoy Rog, Ukraine
fDate :
7/1/1996 12:00:00 AM
Abstract :
This paper describes the open gradient drum type magnetic separator with superconducting magnet system to develop technologies for dry separation of low magnetic mineral raw material of 4-0 mm (medium size) up to 25-0 mm (coarse size). The separation zone is 1200 mm×50 mm with the magnet system-wrap angle equal to 90°, the magnetic field in the separation zone is at the level of 4.5 T, the average value of the magnetic forces is 120 T2/m and the capacity is about 100 t/h. The results of the optimization and numerical calculations of thermophysical processes in magnetic and cryogenic systems are given. The technological developments of the design of some separator units are presented. The paper also presents the techno-economic indices of the separator application at the ore-mining operations
Keywords :
magnetic separation; mineral processing industry; superconducting magnets; cryogenic system; design; dry separation; low magnetic mineral raw material; magnetic forces; open gradient drum separator; optimization; ore mining; superconducting magnets; techno-economic indices; thermophysical processes; wrap angle; Magnetic fields; Magnetic forces; Magnetic properties; Magnetic separation; Magnetic susceptibility; Minerals; Ores; Particle separators; Raw materials; Superconducting magnets;
Journal_Title :
Magnetics, IEEE Transactions on
