Title : 
Niobium resonator development for high-brightness ion beam acceleration
         
        
            Author : 
Delayen, J.R. ; Bohn, C.L. ; Roche, C.T.
         
        
            Author_Institution : 
Argonne Nat. Lab., IL, USA
         
        
        
        
        
            fDate : 
3/1/1991 12:00:00 AM
         
        
        
        
            Abstract : 
Two niobium resonant cavities for high-brightness ion beam acceleration have been constructed and tested. The first was based on a coaxial quarter-wave geometry and was optimized for phase velocity β0=0.15. The cavity, which resonates at 400 MHz in the fundamental mode, operated at an average (wall-to-wall) accelerating gradient at 12.9 MV/m under continuous-wave (CW) fields. At this gradient, a cavity Q of 1.4×108 was measured. The second was based on a coaxial half-wave geometry and was optimized for β0=0.12. This cavity, which resonates at 355 MHz in the fundamental mode, operated at an average accelerating gradient of 18.0 MV/m under CW fields. This is the highest average accelerating gradient achieved to date in low-velocity structures designed for CW operation. At this gradient, a cavity of 1.2×108 was measured
         
        
            Keywords : 
beam handling equipment; cavity resonators; ion accelerators; linear accelerators; niobium; particle accelerator accessories; superconducting devices; type II superconductors; 355 MHz; 400 MHz; Nb resonant cavities; coaxial half-wave geometry; coaxial quarter-wave geometry; continuous wave fields; fundamental mode; high-brightness ion beam acceleration; superconducting cavity; Acceleration; Coaxial components; Conductors; Geometry; Ion beams; Niobium; Particle beams; Q measurement; Resonance; Testing;
         
        
        
            Journal_Title : 
Magnetics, IEEE Transactions on