DocumentCode :
1109070
Title :
Miniature Four-Way and Two-Way 24 GHz Wilkinson Power Dividers in 0.13 μm CMOS
Author :
Kim, Jeong-Geun ; Rebeiz, Gabriel M.
Author_Institution :
California Univ., San Diego
Volume :
17
Issue :
9
fYear :
2007
Firstpage :
658
Lastpage :
660
Abstract :
This letter presents 24 GHz four-way and two-way miniature Wilkinson power dividers (PDs) in a standard CMOS technology. The chip area is significantly reduced using a lumped-element design, and the effective areas of four-way and two-way Wilkinson dividers are 0.33 times 0.33 mm2 and 0.12 times 0.29 mm2, respectively. The four-way Wilkinson divider results in an insertion loss <2.4 dB, an input/output return loss better 15.5 dB, and a port-to-port isolation >24.7 dB from 22 to 26 GHz. The two-way Wilkinson divider results in an insertion loss <1.4 dB, an input/output return loss better 8.9 dB, and a port-to-port isolation >14.8 dB from 22 to 26 GHz. To the author´s knowledge, this is the first demonstration of 24 GHz four-way Wilkinson PD in a standard CMOS technology.
Keywords :
CMOS integrated circuits; integrated circuit design; power dividers; frequency 22 GHz to 24 GHz; lumped-element design; port-to-port isolation; size 0.13 mum; standard CMOS technology; two-way miniature Wilkinson power dividers; CMOS technology; Capacitance; Impedance; Inductors; Insertion loss; MIM capacitors; Power dividers; Power transmission lines; Resistors; Shunt (electrical); 24 GHz; CMOS; Wilkinson PD; four-way power divider (PD); lumped PD;
fLanguage :
English
Journal_Title :
Microwave and Wireless Components Letters, IEEE
Publisher :
ieee
ISSN :
1531-1309
Type :
jour
DOI :
10.1109/LMWC.2007.903451
Filename :
4295124
Link To Document :
بازگشت