DocumentCode :
1117762
Title :
Interleaved buck converters with a single-capacitor turn-off snubber
Author :
Chen, Yaow-Ming ; Tseng, Sheng-Yu ; Tsai, Cheng-Tao ; Wu, Tsai-Fu
Author_Institution :
National Chung Cheng Univ., Taiwan
Volume :
40
Issue :
3
fYear :
2004
fDate :
7/1/2004 12:00:00 AM
Firstpage :
954
Lastpage :
967
Abstract :
This paper proposes interleaved buck converters with a single-capacitor snubber to smooth out switch turn-off transition. The single-capacitor snubber is used to limit rising rate of drain-source voltage of the metal-oxide-semiconductor field-effect transistor (MOSFET) switch in the converters to reduce turn-off loss. In addition, the converters are operated at the boundary of continuous and discontinuous conduction modes (CCM), (DCM) to reduce turn-on loss, and in an interleaving fashion to reduce output current ripple. As compared with the counterparts of conventional converter topologies, the proposed converters have the merits of less component count, higher efficiency over a certain load range, smaller size, and they are easier to implement. Hardware measurements obtained from experimental prototypes have verified these merits.
Keywords :
DC-DC power convertors; current-mode circuits; field effect transistor switches; losses; snubbers; switching convertors; MOSFET switch; continuous conduction modes; conventional converter topologies; discontinuous conduction modes; drain-source voltage; hardware measurements; interleaved buck converters; single-capacitor snubber; switch turn-off transition; turn-off loss; turn-on loss; Buck converters; FETs; Hardware; Interleaved codes; MOSFET circuits; Snubbers; Switches; Switching converters; Topology; Voltage;
fLanguage :
English
Journal_Title :
Aerospace and Electronic Systems, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9251
Type :
jour
DOI :
10.1109/TAES.2004.1337467
Filename :
1337467
Link To Document :
بازگشت