Single Channel Per Carrier Satellite Repeater Capacity, Part 2

This paper analyzes the performance of a number of speech processing techniques that have been considered for single voice channel per carrier transmissions via satellite. This transmission mode is applicable to demand assigiment systems, which make possible the most efficient loading of the satellite transponder applications where the traffic at individual earth terminals is not sufficient to justify a substantial number of dedicated channels. The analysis basically determines the operating point for the satellite transponder which minimizes the required earth terminal G/T. Both analog and digital modulation techniques are considered, and the effects of syllabic companding and voice actuation of carriers are demonstrated. The results are presented in general analytic form, applicable to any modulation technique for which carrier-to-noise density ratio, channel width, and guardband width may be specified. Full carrier modulation is assumed. Curves are also furnished showing the required G/T and uplink per carrier EIRP as a function of the number of voice channels per transponder and the transponder gain. "CCIR/CCITT type" speech quality is assumed, together with a transponder El RP and bandwidth typical of current domestic satellite configurations.