Grid Impedance Estimation via Excitation of LCL -Filter Resonance

Inverters adopted in distributed power generation, active filter, and uninterruptible power supply are often connected to the grid through an inductance-capacitor-inductance (LCL) filter. The impedance of the LCL filter has a typical frequency characteristic with a resonance peak. Hence, the LCL filter has to be damped in order to avoid instability. However, the resonance of the LCL filter can be also excited in a controlled way in order to individuate the resonance frequency in the spectrum (using for example the fast Fourier transform). This paper proposes to use a controlled excitation in measuring the grid impedance, since this one influences also the resonance frequency. This paper will address some possible limits, some solutions, and some implementation issues (e.g., how to obtain a controlled resonance in the filter without damaging the system) in order to use the resonant peak for grid impedance detection. The analysis is validated both by simulations and experimental results.