DocumentCode
1135246
Title
UWB Antenna With Single or Dual Band-Notches for Lower WLAN Band and Upper WLAN Band
Author
Ryu, Kenny Seungwoo ; Kishk, Ahmed A.
Author_Institution
Dept. of Electr. Eng., Univ. of Mississippi, University Park, MS, USA
Volume
57
Issue
12
fYear
2009
Firstpage
3942
Lastpage
3950
Abstract
To prevent interference problems due to existing nearby communication systems within an ultrawideband (UWB) operating frequency, the significance of an efficient band-notched design is increased. Here, the band-notches are realized by adding independent controllable strips in terms of the notch frequency and the width of the band-notches to the fork shape of the UWB antenna. The size of the flat type band-notched UWB antenna is etched on 24 times 36 mm2 substrate. Two novel antennas are presented. One antenna is designed for single band-notch with a separated strip to cover the 5.15-5.825 GHz band. The second antenna is designed for dual band-notches using two separated strips to cover the 5.15-5.35 GHz band and 5.725-5.825 GHz band. The simulation and measurement show that the proposed antenna achieves a wide bandwidth from 3 to 12 GHz with the dual band-notches successfully.
Keywords
multifrequency antennas; ultra wideband antennas; wireless LAN; UWB antenna; bandwidth 3 GHz to 12 GHz; bandwidth 5.15 GHz to 5.825 GHz; dual band-notches; lower WLAN band; single band-notches; upper WLAN band; Antenna measurements; Bandwidth; Communication system control; Etching; Frequency; Interference; Shape control; Ultra wideband antennas; Ultra wideband technology; Wireless LAN; Band-stop function; dual band-notch for lower WLAN band (5.15–5.35 GHz) and upper WLAN band (5.725–5.825 GHz); dual band-notched; ultrawideband (UWB) antenna;
fLanguage
English
Journal_Title
Antennas and Propagation, IEEE Transactions on
Publisher
ieee
ISSN
0018-926X
Type
jour
DOI
10.1109/TAP.2009.2027727
Filename
5165074
Link To Document