DocumentCode :
1135489
Title :
Effects of 
Composite Particles Prepared by Mechanical Process on Dielectric Properties of Epoxy Hybrid Films
Author :
Park, Hui Joon ; Hong, Seung Min ; Lee, Sang-Soo ; Kim, Junkyung ; Park, Min
Author_Institution :
Hybrid Mater. Res. Center, Korea Inst. of Sci. & Technol., Seoul
Volume :
31
Issue :
2
fYear :
2008
fDate :
5/1/2008 12:00:00 AM
Firstpage :
417
Lastpage :
422
Abstract :
A new type of composite filler mechanically treated with multi-walled carbon nanotubes (MWNTs) and (BT) particles was prepared to produce higher dielectric properties in the composite. The hybrid film fabricated by incorporating these composite fillers in an epoxy matrix had a high dielectric constant and similar dielectric loss as compared to the composite which contained neat BT particles. The dielectric properties of these hybrid films were found to be dependent on both the content of MWNTs and mechanical processing time. Results suggest that this novel hybrid film composed of the composite filler and the epoxy matrix can be used for embedded capacitor material.
Keywords :
barium compounds; carbon nanotubes; permittivity; polymer films; C-BaTiO3; CNT; composite filler; composite particles; dielectric constant; dielectric loss; dielectric properties; embedded capacitor material; epoxy hybrid films; epoxy matrix; hybrid films; mechanical process; mechanical processing; multiwalled carbon nanotubes; Barium titanate; composite filler; dielectric property; embedded capacitor; epoxy; hybrid film; mechanical processing; multiwalled carbon nanotubes (MWNTs);
fLanguage :
English
Journal_Title :
Advanced Packaging, IEEE Transactions on
Publisher :
ieee
ISSN :
1521-3323
Type :
jour
DOI :
10.1109/TADVP.2008.920348
Filename :
4492806
Link To Document :
