• DocumentCode
    1146520
  • Title

    Air bearing design, optimization, stability analysis and verification for sub-25 nm flying

  • Author

    Lu, Sha ; Hu, Yong ; Hara, Matthew O. ; Bogy, David B. ; Bhatia, C. ; Hsia, Yiao-Tee

  • Author_Institution
    Comput. Mech. Lab., California Univ., Berkeley, CA, USA
  • Volume
    32
  • Issue
    1
  • fYear
    1996
  • fDate
    1/1/1996 12:00:00 AM
  • Firstpage
    103
  • Lastpage
    109
  • Abstract
    Three sub-25 nm fly height sliders are presented for near contact recording. The designs are geared towards the goal of achieving 10 Gb/in 2 areal density. The optimization procedure presented shows promise for facilitating achievement of this goal. The dynamic simulations show the stability of these designs when disturbed from their steady state conditions
  • Keywords
    magnetic recording; optimisation; 25 nm; air bearing; areal density; design; dynamic simulation; fly height; near contact recording; optimization; slider; stability; Design optimization; Equations; Hard disks; Iterative methods; Laboratories; Manufacturing; Numerical simulation; Simulated annealing; Stability analysis; Steady-state;
  • fLanguage
    English
  • Journal_Title
    Magnetics, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0018-9464
  • Type

    jour

  • DOI
    10.1109/20.477558
  • Filename
    477558
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=1146520