High-throughput layered decoder implementation for quasi-cyclic LDPC codes

This paper presents a high-throughput decoder design for the Quasi-Cyclic (QC) Low-Density Parity-Check (LDPC) codes. Two new techniques are proposed, including parallel layered decoding architecture (PLDA) and critical path splitting. PLDA enables parallel processing for all layers by establishing dedicated message passing paths among them. The decoder avoids crossbar-based large interconnect network. Critical path splitting technique is based on articulate adjustment of the starting point of each layer to maximize the time intervals between adjacent layers, such that the critical path delay can be split into pipeline stages. Furthermore, min-sum and loosely coupled algorithms are employed for area efficiency. As a case study, a rate-1/2 2304-bit irregular LDPC decoder is implemented using ASIC design in 90 nm CMOS process. The decoder can achieve the maximum decoding throughput of 2.2 Gbps at 10 iterations. The operating frequency is 950 MHz after synthesis and the chip area is 2.9 mm².