Impacts of Wind Power on Thermal Generation Unit Commitment and Dispatch

This paper proposes a new simulation method that can fully assess the impacts of large-scale wind power on system operations from cost, reliability, and environmental perspectives. The method uses a time series of observed and predicted 15-min average wind speeds at foreseen onshore- and offshore-wind farm locations. A Unit Commitment and Economic Dispatch (UC-ED) tool is adapted to allow for frequent revisions of conventional generation unit schedules, using information on current wind energy output and forecasts for the next 36 h. This is deemed the most faithful way of simulating actual operations and short-term planning activities for a system with large wind power penetration. The problem formulation includes ramp-rate constraints for generation schedules and for reserve activation, and minimum up-time and down-time of conventional units. Results are shown for a realistic future scenario of the Dutch power system. It is shown that problems such as insufficient regulating and reserve power-which are typically associated with the variability and limited predictability of wind power-can only be assessed in conjunction with the specifics of the conventional generation system that wind power is integrated into. For the thermal system with a large share of combined heat and power (CHP) investigated here, wind power forecasting does not provide significant benefits for optimal unit commitment and dispatch. Minimum load problems do occur, which result in wasted wind in amounts increasing with the wind power installed