DocumentCode
1181780
Title
Prediction model for radiated magnetic field at industrial frequency due to randomly placed conductors pairs
Author
Orlandi, Antonio
Author_Institution
Dept. of Electr. Eng., Univ. of L´´Aquila, Italy
Volume
18
Issue
2
fYear
2003
fDate
4/1/2003 12:00:00 AM
Firstpage
601
Lastpage
609
Abstract
The statistical analysis of the magnetic flux density due to sinusoidal steady-state 50- (or 60-Hz) currents in conductor pairs randomly placed inside a conduit is carried out by means of a suitable developed computation model. From the statistics of the field, an equivalent deterministic model is derived. This model allows one to estimate the magnetic flux density levels without knowing the exact position of the conductors. The results are compared with those measured in two laboratory experimental setup.
Keywords
conductors (electric); magnetic fields; magnetic flux; statistical analysis; 50 Hz; 60 Hz; computation model; equivalent deterministic model; industrial frequency radiated magnetic field prediction model; magnetic flux density; randomly placed conductors pairs; sinusoidal steady-state currents; statistical analysis; Computational modeling; Conductors; Frequency; Magnetic field measurement; Magnetic fields; Magnetic flux density; Predictive models; Statistical analysis; Statistics; Steady-state;
fLanguage
English
Journal_Title
Power Delivery, IEEE Transactions on
Publisher
ieee
ISSN
0885-8977
Type
jour
DOI
10.1109/TPWRD.2002.804569
Filename
1193884
Link To Document