Design, analysis and fabrication of a brush-less DC motor

Author

Mukherjee, Pinaki ; Sengupta, Mainak

Author_Institution

Dept. of Electr. Eng., Indian Inst. of Eng. Sci. & Technol., Howrah, India

fYear

2014

fDate

16-19 Dec. 2014

Firstpage

1

Lastpage

6

Abstract

This paper presents detailed steps and procedure for the design of a permanent magnet brush-less DC machine(PM-BLDC). Here the design(both the armature circuit and the PM field) is done for a 4-pole 0.75 hp, 1500 rpm surface mounted BLDC(SPM-BLDC). First the design and the performance analysis of the machine has been done by hand calculation. The results are then fine tuned and verified using a standard finite element analysis(FEM) software. Parameters of the machine have also been calculated. The designed BLDC motor also have been fabricated.

Keywords

brushless DC motors; finite element analysis; permanent magnet motors; surface mount technology; BLDC motor; FEM software; PM field; SPM-BLDC; armature circuit; brushless DC motor; finite element analysis; permanent magnet brushless DC machine; power 0.75 hp; surface mounted BLDC; Finite element analysis; Permanent magnet motors; Rotors; Stator windings; Torque; Windings; FEM analysis; Fabrication; Permanent magnet Brush-less DC machine; SPM-BLDC;

fLanguage

English

Publisher

ieee

Conference_Titel

Power Electronics, Drives and Energy Systems (PEDES), 2014 IEEE International Conference on

Conference_Location

Mumbai

Print_ISBN

978-1-4799-6372-0

Type

conf

DOI

10.1109/PEDES.2014.7042056

Filename

7042056