DocumentCode
1202704
Title
An analytical method for calculating harmonic currents of a three-phase diode-bridge rectifier with DC filter
Author
Sakui, Masaaki ; Fujita, Hiroshi
Author_Institution
Fac. of Eng., Toyama Univ., Japan
Volume
9
Issue
6
fYear
1994
fDate
11/1/1994 12:00:00 AM
Firstpage
631
Lastpage
637
Abstract
Commonly, three-phase diode bridge rectifiers with an LC filter at the DC side are often used to convert AC input into a DC voltage. It is well known that they generate large amounts of harmonic currents. This paper proposes an analytical method for calculating the harmonic currents for both the continuous and discontinuous current conductions. The equations for the harmonic currents are derived, taking into account the effects of the DC and AC side impedances. All the calculations are conducted only by algebraic calculation with high accuracy. The validity of the proposed method is demonstrated by comparison to the results of time simulation
Keywords
AC-DC power convertors; bridge circuits; network analysis; power filters; power semiconductor diodes; power system harmonics; rectifiers; rectifying circuits; time-domain analysis; AC/DC power convertor; DC filter; LC filter; accuracy; algebraic calculation; analytical method; continuous current; discontinuous current; harmonic currents; impedances; three-phase diode bridge rectifier; time simulation; Accuracy; Bridge circuits; Diodes; Equivalent circuits; Frequency domain analysis; Harmonic analysis; Impedance; Power harmonic filters; Rectifiers; Voltage;
fLanguage
English
Journal_Title
Power Electronics, IEEE Transactions on
Publisher
ieee
ISSN
0885-8993
Type
jour
DOI
10.1109/63.334779
Filename
334779
Link To Document