A novel approach to practical matrix converter motor drive system with reverse blocking IGBT

This paper proposes a novel control strategy and a protection circuit and shows the advantage of utilizing a newly developed reverse blocking insulated gate bipolar transistor (RB-IGBT), to solve several practical problems of the matrix converter. The proposed control strategy is based on a virtual indirect control method with a virtual rectifier and a virtual inverter. Pulse-width modulated (PWM) pulses for the matrix converter are obtained by combining PWM pulses for the virtual rectifier and inverter. As a result, the control part of the input current and output voltage can be clearly separated. Thus, the conventional inverter control algorithms can be applied to the virtual inverter control. The advantage of this method is confirmed by experimental results with a 22-kW induction motor drive system. Good sinusoidal waveforms are obtained for the input and output currents, and the total harmonic distortion (THD) of the input and output current are 5.1% and 1.4%, respectively. The conduction loss of the RB-IGBT is decreased to about two-thirds of the conventional ac switch with series connection diode. Thus, the converter loss is about a half to the conventional PWM rectifier-inverter system with the same capacity. Furthermore, the protection problem is solved by a dynamic clamp method without an electrolytic capacitor. This protection circuit directly dissipates reactive load energy by dynamic clamp operation of an IGBT.