Cadmium chloride assisted re-crystallization of CdTe: The effect of annealing over-treatment

Although the cadmium chloride treatment is an essential process for high efficiency thin film cadmium telluride photovoltaic devices, the precise mechanisms involved that improve the cadmium telluride layer are not fully understood. The treatment parameters have a narrow window, deviating from these even slightly can be detrimental to cell performance. In this investigation we apply advanced microstructural characterization techniques to study the effects of varying two parameters: the temperature of the substrate during the cadmium chloride treatment and the length of time of the treatment. In both cases, the devices have been deliberately over-treated. The effect of the over-treatment on the microstructure of cadmium telluride solar cells, deposited by close spaced sublimation is investigated and related to cell performance. A range of techniques has been used to observe the changes to the microstructure as well as the chemical and crystallographic changes as a function of treatment parameters. Electrical tests that link the device performance with the microstructural properties of the cells have also been undertaken. Techniques used include Transmission Electron Microscopy (TEM) for sub-grain analysis, EDX for chemical analysis and XPS for composition-depth profiling.