DocumentCode
1223834
Title
A hardware readout system for a one dimensional position sensitive proportional counter
Author
Duijin, J.H. ; van Eijk, C.W.E. ; Hollander, R.W. ; Sloof, G.W.
Author_Institution
Dept. of Appl. Phys., Delft Univ. of Technol., Netherlands
Volume
36
Issue
1
fYear
1989
fDate
2/1/1989 12:00:00 AM
Firstpage
593
Lastpage
594
Abstract
The authors developed a hardware readout system for a curved one dimensional position sensitive X-ray proportional counter. Eight analog signals from cathode strips and wedges are processed to give, within a few microseconds, 14-bit information about the position of detection of an X-ray quantum. Elementary parts of their readout system are 9-bit flash-ADCs, multiplying DACs and EPROMs
Keywords
X-ray detection and measurement; nuclear electronics; position sensitive particle detectors; proportional counters; 9-bit flash-ADCs; EPROMs; cathode strips; curved one dimensional position sensitive X-ray proportional counter; hardware readout system; multiplying DACs; wedges; Blades; Cathodes; Counting circuits; EPROM; Hardware; Position measurement; Radiation detectors; Signal processing; Strips; X-ray detectors;
fLanguage
English
Journal_Title
Nuclear Science, IEEE Transactions on
Publisher
ieee
ISSN
0018-9499
Type
jour
DOI
10.1109/23.34507
Filename
34507
Link To Document