Development of a closed AC 2000 kV testing facility

Author

Ohki, Y.

Author_Institution

Waseda Univ., Tokyo, Japan

Volume

5

Issue

4

fYear

1989

Firstpage

20

Lastpage

21

Abstract

A description is given of a recently completed facility for testing cross-linked polyethylene insulated cables (CV cables). The main body of the facility is an AC 2000 kV transformer. A closed SF/sub 6/ gas-insulated (GIL) bus connects to it, and a testing cable is slipped onto its edge. A standard capacitor connects to the GIL to measure the tan delta of the testing cable. The facility adopts a new insulation design that is different from conventional technology in many ways. It has proved to be capable of testing breakdowns in 275- and 500-kV CV cables. The advantages of the facility are enumerated.<>

Keywords

cable insulation; cable testing; dielectric loss measurement; high-voltage techniques; insulation testing; loss-angle measurement; organic insulating materials; polymers; power cables; test facilities; 2 MV; 275 kV; 500 kV; AC transformer; GIL; SF/sub 6/; UHV cables; XLPE; closed gas-insulated bus; cross-linked polyethylene insulated cables; insulation design; loss tangent; standard capacitor; testing facility; Capacitors; Current transformers; Gas insulated transmission lines; Insulators; Joining processes; Oil filled cables; Oil insulation; Power transformer insulation; Testing; Wire;

fLanguage

English

Journal_Title

Electrical Insulation Magazine, IEEE

Publisher

ieee

ISSN

0883-7554

Type

jour

DOI

10.1109/57.35600

Filename

35600