Title :
Mechanical characteristics of the ATLAS B0 model coil
Author :
Foussat, A. ; Dolgetta, N. ; Dudarev, A. ; Mayri, C. ; Miele, P. ; Sun, Z. ; ten Kate, H.H.J. ; Volpini, G.
Author_Institution :
ATLAS Magnet Team, CERN, Geneva, Switzerland
fDate :
6/1/2003 12:00:00 AM
Abstract :
The ATLAS B0 model coil has been tested at CERN to verify the design parameters of the Barrel Toroid coils (BT). The mechanical behavior of the B0 superconducting coil and its support structure is reported and compared with coil design calculations. The mechanical stresses and structural force levels during cooling down and excitation phases were monitored using strain gauges, position sensors and capacitive force transducers instrumentation. In the ATLAS magnet test facility, a magnetic mirror is used to reproduce the electromagnetic forces present in the BT coils, once these are assembled in toroid in the underground cavern in 2004.
Keywords :
accelerator magnets; capacitive sensors; electromagnetic forces; electron accelerators; force sensors; linear accelerators; strain gauges; superconducting coils; superconducting device testing; superconducting magnets; ATLAS B0 model coil; ATLAS magnet test facility; Barrel Toroid coils; CERN; capacitive force transducers; coil design calculations; cooling down phase; design parameters; electromagnetic forces; excitation phase; magnetic mirror; mechanical characteristics; mechanical stresses; position sensors; strain gauges; structural force levels; superconducting coil; support structure; underground cavern; Capacitive sensors; Cooling; Force sensors; Magnetic field induced strain; Monitoring; Stress; Superconducting coils; Superconducting magnets; Testing; Toroidal magnetic fields;
Journal_Title :
Applied Superconductivity, IEEE Transactions on
DOI :
10.1109/TASC.2003.812648
